NEXCOM Industrial Partner

PEAK777VL2 - Nexcom PEAK 777VL2 CPU Board. Intel 45nm/65nm Core 2 Quad/Duo...

larger image

Request Quote
For Price
Part Number:
PEAK777VL2
Model Number:
PEAK777VL2
Make:
NEXCOM
Lead Time:
Available
Qty In Stock:
Available

Nexcom PEAK 777VL2 CPU Board. Intel 45nm/65nm Core 2 Quad/Duo | LGA775 | 2 x PCI Express | Gigabit LAN | SATA | VGA | USB2.0 Simple Type: CPU Board

The Nexcom PEAK 777VL2 series is the PICMG 1.0 full-size Single Board Computer(SBC), which supports Intel 45nm Core 2 Duo/Quad technology. Featuring Intel G41 and ICH7 chipsets. The PEAK 777VL2 support socket LGA775 of Intel Core 2 Quad/Core 2 Duo/Pentium 4/Pentium D/Celeron D processor with 800/1066/1333MHz FSB. The Intel G41 supports dual channel non-ECC DDR3 memory up to 4GB maximum with two DIMM slots and an integrated graphics controller. The South Bridge ICH7 manages SATA HDD ports, and parallel. Furthermore, it supports other versatile I/O ports such as two serial ports, six USB ports and two PCI Express Gigabit LAN ports.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 2 x COM Ports
  • 2 x DIMM, Support DDR3 Memory up to 4GB
  • 2 x Intel 82574L PCI Express Gigabit Ethernet LANs
  • 4 x SATA
  • 8 x USB 2.0
  • Intel G41 and ICH7/ICH7R
  • Single Socket LGA775, Support Intel 45nm/65nm Core 2 Duo/Core 2 Quad with 800/1066/1333 MHz FSB

Specifications

    General
  • BIOS: Award System BIOS; Plug & Play support; 8M-bit flash ROM
  • Chipset: Intel G41 Graphics Memory Controller Hub (GMCH); Intel ICH7/ICH7R I/O Controller Hub
  • CPU: Supports Intel LGA775 Core 2 Quad/Core 2 Duo/Pentium 4/Pentium D/Celeron D processors; Intel Embedded Processors List (Intel Longevity CPU); Intel Core 2 Quad Processor QP400; Intel Core 2 Duo Processor E7400 & E5300 & E6400 & E4300 & E2160; Intel Pentium 4 Processor 651 & 551 & 531; Intel Celeron D Processor 352 & 341; Intel Celeron Processor 440; 533/800/1066 MHz System Bus
  • Dimensions: 338.58mm(L) x 122mm(W); (13.3” x 4.8”)
  • Display: Intel G41 GMCH Integrated; CRT: 1 x DB15 VGA connector
  • I/O: Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH; 2-pin header for SMB; 2-pin header for reset; 2-pin header for power on switch; 2-pin header for power LED; 2-pin header for HDD LED
  • I/O on bracket: 1 x DB15 VGA connector; 2 x RJ45 GbE port; 1 x PS2
  • ISA Support: Through PCI to ISA Interface (ITE 8888); No ISA Master Devices but ISA DMA Devices; Maximize ISA Slot support up to 3
  • On-board LAN: 2 x Intel 82574L PCI Express Gigabit Ethernet LAN; 2 x RJ45 with LED; Supports Boot From LAN (PXE); Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)
  • On-board RTC: On-chip RTC with battery backup; 1 x External Li Battery; Torrance less than 2sec (24 hours) under 25°C;
  • Operating Temperature: 0°C to 60°C
  • Parallel Port: 1 port, with 2x13 box-header(2.0mm)
  • Power Input: Power source from backplane through PCI/ISA Golden Finger; Supports both AT or ATX Power Supplies (Automatically, BIOS default :AT Mode); When change to ATX, the BIOS default setting is as follows: POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME -->[ON]; +3.3V is Converted from +5V and not directly from Backplane or Power Supply; +5Vsb (Standby power) is connected from Backplane through 3 pins Connectors; 4 Pins +12V Power Input Connector
  • Processor: Intel Pentium D
  • PS2: 1 x 6-pin JST connector(2.0mm) for KB/Mouse
  • Relative humidity: 10% to 90% (Non-condensing); Non-operating 5% to 95%, non-condensing
  • SATA: 4 ports
  • Serial Port: 2 ports, with 2x5 box header(2.0mm), supports RS232 only
  • Storage Temperature: -20°C to 85°C
  • System Memory: 2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB, FSB 1066/800MHz Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation
  • System Monitor: 4 voltage (For +3.3V, +5V, +12V, Vcore); 3 Temperatures (CPU, two external Temperature Sensor); 3 FANs speed (CPU, System and MCH FANs)
  • USB: 6 x USB 2.0, 2 ports through I/O bracket, 4 ports through 1x6 JST
  • Watchdog Timer: Watchdog timeout can be programmable by Software from 1 second to 255 seconds; Tolerance 15% under room temperature 25°C

 

Applications

  • None Available

Aliases

  • None Available