PEAK 712VL2 - Nexcom PEAK 712VL2 CPU Board. Full-sized | Socket 478 |...
- Part Number:
- PEAK 712VL2
- Model Number:
- PEAK 712VL2
- Make:
- NEXCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Nexcom PEAK 712VL2 CPU Board. Full-sized | Socket 478 | Intel Pentium 4 Processor | VGA/DDR/Dual LAN (Intel 82559 x 2) Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- ATI M7-CSP32 AGP 4X VGA controller w/32MB memory on-die
- Intel 845E/ICH2 chipsets
- Max. 2GB DDR SDRAM, DDR DIMM x2
- Socket 478 Intel Pentium 4 processor with 400/533MHz system bus up to 2.4GHz+
Specifications
- BIOS: Award System BIOS; Plug & Play support; Advanced Power Management support; Advanced configuration & Power Interface support; 4M bits flash ROM
- Certification: FCC Class A; CE approval
- Chipsets: Intel 845E (MCH); Intel 82801x 1 I/O Controller Hub (ICH2); Firmware Hub (FWH) 4M bits flash ROM x1; PCI V2.2 compliant
- CPU Support: Intel Pentium 4 processor with 256K/512K L2 cache on die; Socket 478 CPU featuring 400MHz/533MHz system bus, CPU speed up to 2.4GHz or above
- Dimensions: 338.58mm(L) x 122mm(W)
- Main Memory: DDR DIMM x 2 Support Max Memory size up to 2GB(DDR200/DDR266); ECC support (single bit error correction/Multiple bit errors reporting); Only support unbuffered DIMM
- On Board I/O: ITE 8712F-A Super I/O; SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2; PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1; Floppy Disk controller: 34-pin connector x 1; 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external keyboard); On Board buzzer x 1; GPIO (4 in 4 out); On board 2-pin header for I^2 C; On board 2-pin header for reset SW / 2-pin for IDE active LED / 2-pin ATX power SW; One 3-pin power header for 3-pin Power Cable connect to Backplane; Board to support ATX Power On function; On board 4-pin Additional Power Source Input; AC97 output, 10-pin header x 1
- On Board LAN: Intel 82559 Ethernet controller x 2; 10 Base T/100 Base TX support, full duplex; Intel 82540 support for 10 Base T/100 Base TX; Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab; Drivers support:DOS/Windows, Windows 95/98/2000, Windows NT, Netware 5.0, Linux; RJ45 with LED connector x 2
- On Board VGA: ATI M7-CSP32 VGA Controller, 1.5V AGP 4X Interface; 32MB VGA Memory on die; Fully PC 98, PC 99, PC 2001 Compliant; 15 pin CRT connector x1; DVI (TMDS) box header x1; TV-out pin header x1; Support dual independent display (DVI/CRT, DVI/TV, CRT/TV)
- On Chip I/O(ICH2): On board USB port x 2; Ultra DMA33/66/100 support, 40-pin connector x 2. Two pins power connector for DOM (Disk On Module)
- PCI to ISA Bridge & ISAMAX Support: ITE 8888Fx 1 PCI to ISA Bridge; Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot
- Real Time Clock: On chip RTC with battery back up; External Li Battery x 1
- Relative Humidity: 10% to 90%, non-condensing
- System Architecture: Full size SBC with PICMG (PCI+ISA) Golden finger; AGP 2.0 compliant; PCI V2.2 compliant; PICMG 1.0 (Rev.2.0) compliant
- System Monitor: Derived from Super IO ITE 8712F-A to support system monitor; 8 voltage (For+1.8V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By); One Fan speed for CPU; Temperature sensor header x 2 (one for CPU internal use, another for external system use)
- Temperature: Operating:0 to 60°C; Storage:-20 to 80°C
- Watchdog Timer: Watchdog timeout can be programmable by Software from 1, 2, 4, 8, 16, 32, 64 seconds
- with ATX Power Source): Soft Power off; Power On by LAN; Power On by Keyboard; Power On by Ring
Applications
- None Available
Aliases
- None Available
Related Items
PEAK-710VL
Nexcom PEAK-710VL CPU Board. Full-size | Socket 478 | Intel
PEAK 712VL2G
Nexcom PEAK 712VL2G CPU Board - Full-sized socket 478 Intel- PEAK 710VL-3G
Nexcom PEAK 710VL-3G CPU Board. Full-sized | Socket 478 | 
PEAK 6720VL
Nexcom PEAK 6720VL Single Board Computer. Full Size | Dual