EBC 300 - Nexcom EBC-300 Series 3.5" Wafer Low Power Embedded Board Celeron...
- Part Number:
- EBC 300
- Model Number:
- EBC 300
- Make:
- NEXCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Nexcom EBC-300 Series 3.5" Wafer Low Power Embedded Board Celeron M 600MHZ, Intel 852GM Chipset with PC 104+, up to 256MB DDR, VGA, Gb LAN, 6x USB, 8x GPIO Simple Type: CPU Board
The Nexcom EBC 300 Series is a 3.5" embedded board with an on-board Intel® Celeron® M 600MHz processor with 512 KB L2 cache or socket Pentium® M/Celeron® M with400 MHz FSB. The EBC 300 features Intel® 852GM and ICH4 chipsets, which supports DDR 200/266 memory, along with integrated graphics with 64 MB shared memory to support CRT and LVDS function. The South Bridge ICH4 provides a 44-pin IDE connector, CompactFlash socket, two serial ports, six USB 2.0 ports, one Gigabit Ethernet LAN port, and an audio interface. The EBC 300 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Audio with Speaker-out, Line-in and Mic-in
- Intel® 852GM and ICH4 Chipset
- On-board 256 MB DDR Memory
- On-board Intel® Celeron® M 600 MHz Processor with 512 KB L2 Cache
- Realtek RTL 8110SC Gigabit Ethernet Controller
- Supports LVDS/ 6 x USB 2.0
Specifications
- BIOS: Award system BIOS; ACPI-Only supports Software Shutdown by 5 Vsb Provided (S0 /S5 only); Advanced Power Management support; 4Mbit flash ROM; Supports Pentium M Speed Step (Customized by Nexcom); Supports Automatic Power On Function
- Certifications: CE approval; FCC Class A
- Compactflash: 1x Internal CompactFlash socket; Support One Type I& II Compact Flash Card (Primary Master)
- CPU: Supports Intel® Celeron® M 600 MHz processor with 512 KB L2 cache and 400 MHz FSB; Support for Intel® Pentium® M processor or Intel® Celeron® M processor in 478-pin, Micro-FCPGA package (mPGA479M Socket)
- Dimensions: 3.5" form factor, 146 mm (L) x 105 mm (W) (5.7" x 4.1")
- Display Interface: Intel® 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology; Up to 64 MB of dynamic video memory allocation; 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolutions up to
- Ethernet: Realtek RTL 8110SC Gigabit Ethernet Controller; 1 x RJ45 with LED; Supports PXE LAN boot ROM for Ethernet Boot up; Supports Wake on LAN (When 5 Vsb power available)
- GPIO: 8 GPIO lines via header (GPI 0 ~ 3 and GPO 0 ~ 3)
- IDE: 1 x 44-pin IDE connector
- Memory: On-board 256 MB Non-ECC DDR SDRAM memory
- Operating Temperature: 0°C to 60°C
- Power Supply: Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G Memory: On board DDR 256 MB:+12V +5V; Full-Loading Mode(A):0.2 A 6.2A; Light loading Mode(A):0.2A 2.5A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.
- Processor: Intel Pentium M
- Relative humidity: Operating 10% to 90%, non-condensing; Non-operating 5% to 95%, non-condensing
- RTC: On-chip RTC with battery back up; 1 x External Li-Ion battery - The battery socket is in flat direction; Tolerance less than 2 sec (24 hours) under 25°C environment
- Serial Port: 1 port, with 16 C550 UARTs, 1 x DB-9 Connector
- Storage temperatures: -20°C to 85°C
- System Chipset: Intel® 852GM 400 MHz; Intel® ICH4
- System Monitor: Derived from Super I/O to support system voltage, fan speed, temperature monitoring
- USB 2.0: 6 ports, with two direct output, four from 1x6 JST; On-board 3-pin header for I2C, one pin for GND; On-board 2-pin header for Reset switch
Applications
- None Available
Aliases
- None Available
