EBC 300-SKT-256M - Nexcom-EBC 300-SKT-256M-Cpu Board Simple Type: CPU Board
- Part Number:
- EBC 300-SKT-256M
- Model Number:
- EBC 300
- Make:
- NEXCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Nexcom-EBC 300-SKT-256M-Cpu Board Simple Type: CPU Board
A 3.5" board with an on-board Intel Celeron M 600 MHz processor with 512 KB L2 cache or socket Pentium M/Celeron M with 400 MHz FSB, the EBC 300 features Intel 852GM and ICH4 chipsets, which supports DDR 200/266 memory, along with integrated graphics with 64 MB shared memory to support CRT and LVDS function. The South Bridge ICH4 provides a 44-pin IDE connector, Compact Flash socket, two serial ports, six USB 2.0 ports, one Gigabit Ethernet LAN port, and an audio interface. The 3.5" board, EBC 300, is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Audio with Speaker-out, Line-in and Mic-in ?
- Intel 852GM and ICH4 Chipset
- On-board 256 MB DDR Memory ?
- On-board Intel Celeron M 600 MHz Processor with 512 KB L2 Cache
- Realtek RTL 8110SC Gigabit Ethernet Controller ?
- Supports LVDS/ 6 x USB 2.0 ?
Specifications
- 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan: Display
- 8 GPIO lines via header (GPI 0 ~ 3 and G: I/O
- BIOS: Award system BIOS
- Certifications: CE approval
- Chipset: Intel 852GM 400 MHz
- CPU: Supports Intel Celeron M 600 MHz processor with 512 KB L2 cache and 400 MHz FSB
- Dimensions: 3.5" form factor, 146 mm (L) x 105 mm (W) (5.7" x 4.1")
- Display Interface: Intel 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology
- Ethernet: Realtek RTL 8110SC Gigabit Ethernet Controller
- FCC Class A: System
- I/O: Serial port: 1 port, with 16 C550 UARTs, 1 x DB-9 Connector
- IDE: 1 x 44-pin IDE connector: System
- Intel ICH4: Display
- Memory: On-board 256 MB Non-ECC DDR SDRAM memory
- Operating Temperature: Operating temperatures: 0°C to 60°C
- Power Supply: Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G Memory: On board DDR 256 MB:+12V +5V; Full-Loading Mode(A):0.2 A 6.2A; Light loading Mode(A):0.2A 2.5A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.
- Relative humidity: Operating 10% to 90%, non-condensing; Non-operating 5% t: System
- RTC: On-chip RTC with battery back up
- Storage Devices: CF: 1x Internal CompactFlash socket
- Support for Intel Pentium M processor or Intel Celeron M processor in 478-p: System
- Supports Automatic Power On Function: System
- Supports Wake on LAN (When 5 Vsb power available): System
- System Monitor: Derived from Super I/O to support system voltage, fan speed, temperature monitoring
- Tolerance less than 2 sec ( 24 hours ) under 25°C environment: System
Applications
- None Available
Aliases
- None Available
