EBC 300-C65-256M - Nexcom EBC 300-C65-256M CPU Board - Celeron M 600 on board CPU type,...
- Part Number:
- EBC 300-C65-256M
- Model Number:
- EBC 300
- Make:
- NEXCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Nexcom EBC 300-C65-256M CPU Board - Celeron M 600 on board CPU type, Intel 852GM Chipset with PC 104+, 256 MB DDR Max Memory Support, 3.5" Wafer Single Board Computer Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Audio with Speaker-out, Line-in and Mic-in
- Intel 852GM and ICH4 Chipset
- On-board 256 MB DDR Memory
- On-board Intel Celeron M 600 MHz Processor with 512 KB L2 Cache
- Realtek RTL 8110SC Gigabit Ethernet Controller
- Supports LVDS/ 6 x USB 2.0
Specifications
- BIOS: Award system BIOS; ACPI: Only supports Software Shutdown by 5 Vsb Provided (S0 /S5 only); Advanced Power Management support; 4 Mbit flash ROM; Supports Pentium M Speed Step (Customized by Nexcom); Supports Automatic Power On Function
- Certifications: CE approval; FCC Class A
- Chipset: Intel 852GM 400 MHz; Intel ICH4
- CPU: Supports Intel Celeron M 600 MHz processor with 512 KB L2 cache and 400 MHz FSB Support for Intel Pentium M processor or Intel Celeron M processor in 478-pin, Micro-FCPGA package (mPGA479M Socket)
- Dimensions: 3.5" form factor, 146 mm (L) x 105 mm (W) (5.7" x 4.1")
- Display Interface: Intel 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology; Up to 64 MB of dynamic video memory allocation; 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolutions up to
- Ethernet: Realtek RTL 8110SC Gigabit Ethernet Controller; 1 x RJ45 with LED; Supports PXE LAN boot ROM for Ethernet Boot up; Supports Wake on LAN (When 5 Vsb power available)
- Humidity: Operating:Operating 10% to 90%, non-condensing; Storage:5% to 95%, non-condensing
- I/O: Serial port: 1 port, with 16 C550 UARTs, 1 x DB-9 Connector; USB 2.0: 6 ports, with two direct output, four from 1x6 JST; On-board 3-pin header for I2C, one pin for GND; On-board 2-pin header for Reset switch; 8 GPIO lines via header (GPI 0 ~ 3 and G
- Memory: On-board 256 MB Non-ECC DDR SDRAM memory
- Power Supply: Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G Memory: On board DDR 256 MB:+12V +5V; Full-Loading Mode(A):0.2 A 6.2A; Light loading Mode(A):0.2A 2.5A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running
- RTC: On-chip RTC with battery back up; 1 x External Li-Ion battery; The battery socket is in flat direction; Tolerance less than 2 sec ( 24 hours ) under 25°C environment
- Storage Devices: CF:1x Internal CompactFlash socket; Support One Type I& II Compact Flash Card (Primary Master); IDE:1 x 44-pin IDE connector
- System Monitor: Derived from Super I/O to support system voltage, fan speed, temperature monitoring
- Temperature: Operating:0°C to 60°C; Storage:-20°C to 85°C
Applications
- None Available
Aliases
- None Available
