PEAK 6720VL - Nexcom PEAK 6720VL Single Board Computer. Full Size | Dual...
Request Quote
For Price
- Part Number:
- PEAK 6720VL
- Model Number:
- PEAK 6720
- Make:
- NEXCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Nexcom PEAK 6720VL Single Board Computer. Full Size | Dual Socket 370 | Pentium III Support | Serial Ports | VGA | LAN Simple Type: CPU Board
Nexcom's PEAK 6720VL Full Size CPU Board supports dual Pentium III FC-PGA/FC-PGA2 CPUs with 100/133MHz FSB up to 1.26GHz or above and a maximum of 3GB of 1680pin DIMM SDRAM (3 slots). The card utilizes the ServerWorks LE-T System Chipset and the C&T 69030 VGA controller chipset with 4MB of on-die memory. The LAN controller uses Intel's 82559 chipset, and the board has ISAMAX support for up to a 20-slot ISA card.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- C&T 69030 VGA controller with 4MB on die Memory
- Intel Dual Pentium III FC-PGA/FC-PGA2 CPU with 100 /133MHz FSB up to 1.26GHz or above
- Inter 82559 10/100 Base T/TX Ethernet controller
- ISAMAX support up to 20 slots ISA card
- Max. 3GB SDRAM, 168-pin DIMM x 3
- ServerWorks LE-T Chipset
Specifications
- BIOS: Award System BIOS, 4M bits flash ROM
- Board Description: Full size SBC with 64 bit/66MHz PCI / ISA Golden finger
- Board Type: Full Size
- Certification: CE Approval; FCC Class A
- Chipset: ServerWorks LE-T and OSB4, PCI V2.2 compliant
- CPU Support: Intel dual Socket 370 Pentium III FC-PGA/FC-PGA2 with 100/133MHz FSB, PCI V2.2 compliant
- Dimensions: 338.58mm(L) x 122mm(W)
- Environmental: Operating Temperatures: 0ºC to 60ºC; Storage Temperatures: -20ºC to 80ºC; Relative Humidity: 10% to 90% (Non-condensing)
- Expansion: On Board Nexcom proprietary PCI interface; Reserved 32-bit PCI interface for Nexcom EBK module
- ISAMAX Support: Maximize ISA signals to support up to 20 ISA cards
- LAN (Ethernet): 10 Base T/100 Base TX support from Intel's 82559 Ethernet controller, 1x RJ45 connector
- Memory Support: Up to 3GB of registered 72-bit ECC SDRAM in 3x 168-pin DIMM sockets, Supports Memory ECC & scrubbing
- On Board I/O: NSPC97317 Server I/O; SIO x 2 with 2 x 16C550 UARTs, 10 pin connector x 1, 9 pin D-Sub x 1; PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1; Floppy Disk controller: 34 pin connector x 1; On chip enhanced IDE x 2, Ultra DMA 33 support, 40 pin connector x 2, two power DIN beside the IDE connector support DOM(Disk On Module); External Keyboard 5 pin connector x 1; 6 pin mini DIN connector x 1 for PS/2 keyboard/mouse; On board USB port x 2; On Board buzzer x 1; On board 2 pin header for I C; GPIO (4 in 4 out); On Board 2 pin header for reset SW, 5 pin for key-lock, 4 pin for Speaker, 2 pin header for power push button, 3 Pin Jst (5Vsb, PS-On, GND) to Backplane; Power Connector ( AUX Spec ) 6 pin x 1
- On Board RTC: On chip RTC clock/calendar with battery backup
- PICMG Standard: PICMG 1.0 (Rev.2.0) compliant
- Power Requirements: +5V:20A (Max); +12V:600mA (Max); -12V:50mA (Max); +3.3V:5A (Max)
- Processor: Intel Pentium III
- System Monitor: Winbond W83782D; Eight voltage; Two fan speeds; 2 on-die Temperature sensors, 1 system sensor
- Video: C&T 69030 w/ 4MB memory on die, TFT LCD/DSTN LCD/CRT control, 1x 15pin CRT & 1x 50pin LCD Panel connector
- Watchdog Timer: 1~64 seconds time-out intervals
Applications
- None Available
Aliases
- None Available