EBC 580E - Nexcom EBC-580E CPU Board with 5.25" VIA/Eden/C7 Embedded with Dual Display by LVDS, Analog VGA, 2x Gbe LAN, Audio, 4x USB, Compact Flash, DIMM

EBC 580E - Nexcom EBC-580E CPU Board with 5.25" VIA/Eden/C7 Embedded with Dual...

Request Quote
For Price

Part Number:: EBC 580E
Model Number:: EBC 580E
Make:: NEXCOM
Lead Time:: Available
Qty In Stock:: Available

Nexcom EBC-580E CPU Board with 5.25" VIA/Eden/C7 Embedded with Dual Display by LVDS, Analog VGA, 2x Gbe LAN, Audio, 4x USB, Compact Flash, DIMM Simple Type: CPU Board

The 5.25” Nexcom EBC 580E Series embedded board computer is Based on VIA’s new generation of embedded CPUs featuring Eden (low power), C7 (high performance) and also new VIA Nano processor. The EBC 580E Series incorporates a VIA CN700 and 8327R+ chipset. The VIA CN700 supports un-buffered non-ECC DDR2 533/400 memory up to 1GB and offers a powerful integrated graphics engine. The South Bridge 8327 R+ chipset provides a standard 32-bit/33 MHz PCI slot, parallel port, 44-pin IDE connector, SATA connector, CompactFlash socket, and numerous other I/O ports such as four serial ports, four USB 2.0 ports, two Gigabit Ethernet LAN ports, an audio interface, as well as others. The RoHS compliant EBC 580E is the enhancement version from EBC 580, keeping the same mechanical dimensions to share the same chassis with EBC 580board. The EBC 580E has many enhancementw compared to the EBC 580, utilizing DDR2 memory, support USB 2.0 and SATA storage, integrated dual Gigabit Ethernet, and supports AT & ATX power supplies. Additionally, the new EBC 580E supports single wide range of LVDS panel ranging from 18-bit to 48-bit panels for cost down purpose.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

1 x 240-pin DDR2 DIMM Socket Supports Un-buffered Non-ECC DDR2 533/400 up to 1 GB
2 x Realtek RTL8110SC Gigabit Ethernet Controller
4x USB
CompactFlash Socket
Supports Dual Display by LVDS and VGA
VIA CN700 and 8237 R+ Chipsets
VIA Eden™/C7 with V4 Bus Processors On-board

Specifications

General

AT mode: Power Required: +5 V/+12 V; No Power On push Button, No Software Shutdown function and No LAN1 remote wake up
ATX mode: Power required: +12 V/+5 V/+5 Vsb; Supports Power On push Button, Software Shutdown function and LAN1 remote wake up only; 2-pin Header for Power On Push Button
Audio: VIA, VT1613 CODEC for AC97 V 2.0; MIC-in, Speaker-out, CD-in, Line-in
BIOS: Award System BIOS; Supports Power On after power fail as a BIOS option; Supports Wake on LAN; 4 Mbit flash ROM
Certifications: CE approval; FCC Class A
CPU: VIA Eden V4 500 MHz; VIA Eden V4 1 GHz; VIA C7 1.5 GHz; VIA Nano compatible
CPU Power Requirements: VIA C7 1.5GHz/400MHz; Memory - 1 x DDR2 1GB
Digital I/O: 2x4 pin header (2.54mm)
Dimensions: 203mm(L) x 146mm(W) (7.9" x 5.7")
Display: VIA VT1636 transmitter; Analog VGA Interface:1 x DB15 connector; LVDS Interface:2 x DF13 20-pin LVDS connector for internal; connection, supports single (18-bit)or dual pixel (36bit) LVDS panel; CCFL: 1 x CCFL for LCD panel backlight inverter power
Form Factor: 5.25"
I/O Interface: On-board header for reset SW and HD active LED
I2C: On-board 3-pin header for I2C, one pin for GND
IrDA: on-board pin header for IrDA Tx/Rx
Main Memory: 1 x 240-pin DIMM Socket for up to 1 GB un-buffered non-ECC DDR2 533/400 memory
On-board LAN: 2 x 10/100/1000 network connection Realtek RTL8110SC; Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link 100, and 1000 LAN LED); Supports Wake on LAN (When 5 Vsb power available).(LAN1 is available for Wake up, LAN2 is not available for Wake up)
On-board RTC: On-chip RTC with battery back up; 1 x External Lithium battery
Operating Temperature: 0°C to 60°C
Parallel Port: 1 port, with 2x13 box header (2.0mm)
Power input: 3-pin header for AT/ATX mode switch; +3.3 V is converted from +5 V; 6-pin power input connector; 3-pin Jst connector to receive the 5 Vsb input from power source; Factory default setting is AT Mode
Processor: VIA C7
PS/2: 1 x Mini-Din for Keyboard/Mouse
Relative Humidity: 10% to 90% (Non-condensing)
Serial Port: 4 ports, with 1x 40 pin header, COM 2 for RS 232/422/485
SMBus: 2.0 controller
Storage: 1 x CF internal socket; 1 x 44-pin connector (secondary)
Storage Temperature: -20°C to 80°C
System Chipset: VIA CN700 / VIA®8237R+
System Monitor: Derived from Super I/O to support system monitor; Monitoring of 5 voltages, 3 temperatures and 2 fan speeds; 5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V); 3 temperature (For CPU and two external for system); 2 fan speed ( one for CPU and one for systems)
System Power Requirements: Full-Loading Mode - 1.28 A(+12 V), 4.17 A(+5 V), Utilize CPU 100% with Burn-in test running; Light-Loading Mode - 0.36 A(+12 V), 1.71 A(+5 V), Utilize CPU loading below 5% without application running
USB: USB 2.0 x 4
VGA: 1 x DB15 VGA port
Watchdog Timer: Watchdog timeout is programmable by software from 1 second to 64 seconds

Applications

None Available

Aliases

None Available

NEXCOM Industrial Partner